模型网论坛

 找回密码
 注册用户
搜索
热搜: 活动 交友 discuz
查看: 13505|回复: 24

盐分掉漆法

[复制链接]
发表于 2004-4-20 13:35:58 | 显示全部楼层 |阅读模式

马上注册模型网

您需要 登录 才可以下载或查看,没有帐号?注册用户

x
<><B>    盐分掉漆法就是利用盐分的不溶于漆的特性作遮盖</B>,说复杂很复杂,说简单很简单。
1<B>就是先喷上底漆</B>,如深棕灰色,你要确定掉漆后的底色,<B>用很浓的盐水,再加上一些盐,待底漆干燥后,在你想要的区域涂上</B>,面积要小,

2<B>下面是你要的中间层</B>,比如灰加一点棕色加一点最外一层的基本漆色比如黄色,颜色比基本漆色深、底漆浅,再喷,薄一些。

3<B>待干燥后,用棉签擦去盐分</B>,这样就出现了有浅到深的底色,

4<B>干了之后再用盐分点掉漆的区域</B>,面积要大过第一次形状要更加接近最后的掉漆效果,点涂,甚至撒盐粒让它自然扩展,附着在不规则表面,等待干燥后。

5<B>开始喷基本漆也就是最浅的面漆</B>,喷得要薄,掌握好厚度。之后等待干燥,一旦干燥后在擦去盐分时候是要注意方向的,尽量按照自然划痕去擦拭,直到达到你满意的效果,之后就出现了你看到的斑驳的掉漆了,但是这时边界比较硬。

6<B>再用透镜法,见相应的介绍用油画颜料多色作滤镜,之后用天然土或粉彩做表面色差处理</B>,深浅不一,如正常效果,这样目的就达到了,完美和真实的掉漆效果就在你的面前出现了,完全是自然的掉漆,如真实的一样。不过任何技法都要多测试多锻炼才能出效果。练吧!绝对可以的!不可能只用一种新的技法就成为大师的,还是要多试多练</P>
<>国外高人作品:</P>



<><img src="attachments/dvbbs/2004-4/2004420133136508.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/200442013332946.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/2004420133350430.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
</P><img src="attachments/dvbbs/2004-4/2004420133747807.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/2004420133747600.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/2004420133747943.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/2004420134125890.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />
<img src="attachments/dvbbs/2004-4/2004420134125807.jpg" border="0" onclick="zoom(this)" onload="if(this.width>document.body.clientWidth*0.5) {this.resized=true;this.width=document.body.clientWidth*0.5;this.style.cursor='pointer';} else {this.onclick=null}" alt="" />

[此贴子已经被作者于2004-4-20 13:41:28编辑过]
发表于 2004-4-22 14:47:02 | 显示全部楼层
没看明白啊。。看来要自己动手做一遍才能理解啊。。。
发表于 2004-4-23 20:36:28 | 显示全部楼层
莫非是传说中的“食盐渍洗法”???
发表于 2004-4-25 13:40:15 | 显示全部楼层
车不错!
发表于 2004-4-26 10:03:12 | 显示全部楼层
<>以前模型世界上有人讲过这个方法,</P><>做了一架飞机来示例。</P><>那天也试试。</P>
发表于 2004-4-26 10:03:17 | 显示全部楼层
<>以前模型世界上有人讲过这个方法,</P><>做了一架飞机来示例。</P><>那天也试试。</P>
发表于 2004-4-26 19:43:56 | 显示全部楼层
<>打算去试试!</P>
发表于 2004-4-29 12:08:55 | 显示全部楼层
效果很棒,可惜我没有喷枪
发表于 2004-4-30 13:31:48 | 显示全部楼层
此类上乘武功,俺也在学习使用,效果确好!值得推荐大家!
发表于 2004-4-30 15:43:26 | 显示全部楼层
不懂
您需要登录后才可以回帖 登录 | 注册用户

本版积分规则

QQ|首页|手机版|Archiver|模型网 ( 京ICP备12011049号 )

GMT+8, 2024-5-9 01:32

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表